V Shape Galvanized Expanded Metal Lath for Stucco Building Construction with 2500*600mm Size and 100mm Rib Distance

V Shape Stucco Building Construction Galvanized Expanded Metal High Rib Lath

V Shape Stucco Building Construction Galvanized Expanded Metal High Rib Lath Introduction

V Shape Stucco Building Construction Galvanized Expanded Metal High Rib Lath is a high-strength, self-supporting steel lath manufactured from a solid sheet of galvanized or stainless steel. It undergoes a simultaneous slitting and stretching process, which forms a uniform diamond mesh pattern with integrated V-shaped ribs running through its length.
This unique ribbed design provides exceptional stiffness and tensile strength, making it an ideal reinforcing and backing material for Portland cement and gypsum plaster systems. The expanded mesh keys mechanically with the applied plaster, ensuring a monolithic, secure, and long-lasting bond. It is a fundamental component in modern construction for creating durable walls, ceilings, and fireproofing assemblies.

V Shape Stucco Building Construction Galvanized Expanded Metal High Rib Lath Characteristics

1. Good mechanical properties and low lateral pressure
2. Directly observe the pouring process
3. Light dead weight, convenient transportation and installation It is only one tenth of the weight of ordinary steel mould, which can be installed quickly and transported easily.
The special mesh allows visual inspection of the pouring work, thus reducing the risk of pores and beehives.
4. Optimize the process and increase the shear interface
By the porosity of the closure network with dense special mesh, a little force can be used for the reinforcement of 12mm below.The steel bar with a larger diameter can be cut out of the mesh until the steel bar passes through the back plate and returns to the position.The fastener mesh can also be installed before the binding reinforcement and then inserted through the mesh.During pouring, the mortar penetrates into the interface through mesh holes to form a coarse grain interface with very ideal shear resistance.
5. Easy to Pierce and tie reinforcement continuously
6, suitable for piecewise pouring concrete, construction civilization
Multi - performance, easy to cut, can bend and bend according to the required form of supporting die.
Permanent formwork can bond the next cast concrete without the need to disassemble or make joints, thus simplifying interface preparation.
7. Socket and cutting are easy to operate

V Shape Stucco Building Construction Galvanized Expanded Metal High Rib Lath Key Attributes

V Shape Expanded Metal Lath

2500*600mm Galvanized Expanded Metal

100mm Rib Distance Perforated Metal Mesh

V Shape Galvanized Expanded Metal Lath for Stucco Building Construction with 2500*600mm Size and 100mm Rib Distance Images